Addition Concrete & Masonry · Hinsdale, IL
Addition Concrete & Masonry in Hinsdale
Planning a home, garage, or commercial addition in Hinsdale? CLMC handles the concrete foundations, footings, slabs, grading, brick/block work, and masonry tie-ins that give additions a solid base.
Veteran-owned · Concrete · Foundations · Masonry · Hinsdale
Our Scope
The Foundation Has to Be Right First.
CLMC focuses on the concrete, foundation, grading, and masonry portions of addition projects. We can work alongside your general contractor, architect, or builder to complete the structural exterior scope properly.
We don't handle framing, roofing, plumbing, electrical, HVAC, or interior finishing. Our scope is the base — the footings, walls, slabs, drainage, brick/block, and masonry that determines whether an addition holds up or fails.
Local Expertise
Additions in Hinsdale
Hinsdale's architectural homes and high-value additions demand precision at every level. Foundation work here isn't just about code minimums — footings, walls, and slabs need to be engineered for the specific loads and soil conditions of each lot.
Brick matching is critical on Hinsdale additions. The village has a mix of historic and newer brick homes, and a careless masonry tie-in creates a visible color or texture break that reduces property value. We source matching brick and manage transitions so the addition reads as part of the original home.
We routinely coordinate with the architects, builders, and designers who work on Hinsdale additions. Clear scope boundaries and precise execution on the concrete, foundation, and masonry portions keep high-end projects on schedule and on spec.
Scope of Work
What We Handle
The Risk
Why Addition Foundations Fail
Poor Grading
Grade that slopes toward the foundation instead of away from it channels water directly into the new addition's base.
Bad Drainage
Missing or undersized drainage systems allow hydrostatic pressure to build against new foundation walls.
Undersized Footings
Footings not engineered for the addition's load cause settlement and cracking that worsens every season.
Poor Soil Prep
Uncompacted or improperly prepared soil under footings and slabs leads to differential settlement between old and new construction.
Bad Waterproofing
Waterproofing applied incorrectly or skipped below grade allows water to saturate foundation walls and enter the structure.
Weak Masonry Tie-Ins
New masonry not properly connected to the existing structure creates a seam that separates and cracks over time.
Concrete Cracking
Concrete poured too wet, poorly consolidated, or finished incorrectly develops cracks under load and thermal stress.
Foundation Movement
Footings poured above frost depth heave during freeze-thaw cycles, cracking walls and slabs within the first winter.
Mismatched Masonry
Brick that doesn't match the existing home creates a visible color or texture break that reduces property value.
How We Work
Our Process
01
Review Plans and Site Conditions
We review your architectural plans, assess soil conditions, access points, and the existing structure to understand the full foundation and masonry scope before pricing.
02
Confirm Scope, Access, and Sequencing
We confirm site access, existing grades, excavation depths, and sequencing with your GC, architect, or builder so foundation work fits the project schedule.
03
Grading and Site Prep
Site is graded and prepared for proper drainage away from the new foundation. Soil is compacted and prepped before any concrete is ordered.
04
Footings and Foundation Work
Footings are excavated below frost depth, reinforced, and poured to spec. Foundation walls are formed and poured with correct reinforcement.
05
Slab and Foundation Wall Construction
Slabs and foundation walls are formed to spec with correct reinforcement, control joints, and elevation. Forms are checked for plumb, level, and alignment.
06
Brick, Block, and Masonry Tie-Ins
Brick and block work is installed with matching materials. Masonry tie-ins to the existing structure are executed so the addition reads as part of the original home.
07
Waterproofing and Drainage Coordination
Foundation waterproofing, drainage board, and below-grade water management are installed before backfill. Every penetration and transition is sealed.
08
Cleanup and Final Review
Site is cleaned. Form ties are stripped. We walk the project with you to confirm every scope item is done right before the build moves forward.
Project Examples
Foundation & Masonry Work for Additions
Concrete foundation for residential addition
Foundation walls tied into existing home
Foundation walls and slab prep
Excavation and concrete foundation work
Residential addition foundation package
Questions
FAQ: Additions in Hinsdale
Do you build full additions in Hinsdale?
No. CLMC handles the concrete, foundation, grading, and masonry portions of addition projects in Hinsdale. We do not handle framing, roofing, plumbing, electrical, HVAC, or interior finishing. We work alongside your general contractor, architect, or builder to complete the structural base.
Can you pour concrete foundations for additions in Hinsdale?
Yes. We pour footings, foundation walls, and slabs for home and garage additions in Hinsdale. Every footing is excavated below frost depth and engineered for the load of the addition and local soil conditions.
Do you work with general contractors or architects in Hinsdale?
Yes. We routinely coordinate with general contractors, architects, and builders on addition projects in Hinsdale. We review plans, confirm scope and sequencing, and handle the concrete, foundation, grading, and masonry work within our expertise.
Can you help with grading and drainage around a new addition?
Yes. Proper grading and drainage around new foundation work is part of the scope. If water pools toward the foundation or drainage is undersized, problems start immediately. We handle grading, drainage paths, and waterproofing coordination as part of the foundation package.
Can you handle garage addition foundations in Hinsdale?
Yes. We handle garage slabs, footings, and foundation walls for attached and detached garage additions in Hinsdale. We also handle driveway and flatwork tie-ins where needed.
Can you match brick or masonry on an existing home?
Yes. Brick matching and masonry tie-ins are part of our scope. We source matching brick and manage transitions at corners, rooflines, and openings so the addition reads as part of the original structure — not a visible add-on.
What addition scopes does CLMC handle?
CLMC handles concrete foundations, footings, foundation walls, slabs, grading and site prep, drainage and waterproofing coordination, brick and block masonry, masonry tie-ins to existing structures, and exterior flatwork around additions. We do not handle framing, roofing, plumbing, electrical, HVAC, interior finishing, or design-build services.
Do you work on commercial additions in Hinsdale?
Yes, where the scope fits our expertise. We handle foundation and slab packages for commercial additions in Hinsdale, including footings, walls, and concrete placement engineered for commercial loads. We do not provide full commercial general contractor services.
Where We Work
Areas We Serve
We serve Hinsdale and nearby communities including Clarendon Hills, Burr Ridge, Western Springs, and Oak Brook. Our crews work across DuPage County.